Troubleshooting and Resolving Smok Novo 3 Not Hitting with Blinking Light Issues (2024)


Encountering issues with your Smok Novo 3 not hitting correctly or blinking? You're not alone. In this comprehensive guide, we'll walk you through troubleshooting steps to resolve common problems and ensure you're back to enjoying a smooth vaping experience.

Common Reasons for Smok Novo 3 Not Hitting with Blinking Light

When faced with a blinking light issue, several factors might be at play. Low battery voltage, a clogged atomizer, or using the wrong resistance coil can hinder proper functioning. Let's delve into each potential cause.

Low Battery Voltage

Ensure your battery has sufficient charge. If not, recharge or replace it to meet the device's voltage requirements for proper firing.

Clogged Atomizer

A clogged atomizer reduces vapor production. Cleaning or replacing the atomizer coil can resolve this issue and restore optimal performance.

Incorrect Resistance Coil

Using a resistance coil incompatible with your device can result in improper hits. Verify and select the correct coil to ensure seamless functionality.

Troubleshooting Steps for Non-Hitting Smok Novo 3 with Blinking Light

Follow these steps to troubleshoot and resolve the blinking light issue:

1. Check Battery Voltage

Verify that the battery has adequate voltage. Recharge or replace if needed.

2. Clean or Replace Atomizer Coil

Address atomizer issues by cleaning or replacing the coil, especially if clogging is evident.

3. Ensure Correct Resistance

Confirm that the resistance coil matches your device specifications for optimal performance.

Insights on Smok Novo 3 Power Output and Flashing Lights

Understanding the device's power output when encountering flashing lights is crucial. The Smok Novo 3 provides variable wattage/voltage modes, allowing users to customize their vaping experience.

Adjusting Settings for Desired Vapor Output

Navigate the LCD screen interface to modify wattage/voltage settings for your preferred vapor output. Take advantage of preheat mode for enhanced flavor production.

Possible Malfunctions Causing Blinking Lights and No Hitting

Several malfunctions can lead to unexpected blinking lights and non-hitting issues. Check for connection issues between the battery and atomizer, and assess potential power outages.

Safety Measures for Smok Novo 3 Not Hitting with Flashing Lights

When faced with flashing lights, prioritize safety:

1. Check for Short Circuits

Inspect wiring, connections, and batteries for signs of wear or damage to avoid short circuit conditions.

2. Review Thermal Conditions

Be aware of potential thermal issues and overheating due to extended use.

3. Prevent Overcharging

Ensure the device has protection against overcharging to prevent battery damage.

Addressing Unusual Cases of Puffing Less with Blinking Lights

When the power indicator blinks, consider the following:

Avoid Lower Grade Equipment

Using subpar equipment may affect output performance. Choose reliable coils and atomizers for a consistent vaping experience.

Monitor Coil Changes

Frequent coil changes can impact performance. Stick to a suitable replacement schedule to maintain optimal functionality.

Unregulated Mods and Output Performance

Be cautious when using unregulated mods, as they can influence output performance. Understand the risks involved.

Operating a SMOK NOVO 3 MOD Kit with Multi Functions

Maximize your experience by understanding the device's limits:

1. Know Wattage Output Limits

Operate within the recommended wattage output limits to avoid issues.

2. Consider External Influences

Be mindful of temperature effects on longer puffs and observe sensor readings for any anomalies.

Design and Quality Impact on User Experience

The quality and design of your device significantly impact your vaping experience. Consider:

Construction Materials

Evaluate the materials used, such as metals and plastics, to ensure durability and longevity.

Manufacturer Reputation

Choose devices from reputable manufacturers with stringent quality control measures.

In conclusion, troubleshooting and understanding your Smok Novo 3 are crucial for a seamless vaping experience. Follow the outlined steps and considerations to address issues and enhance your overall satisfaction with the device.

Troubleshooting and Resolving Smok Novo 3 Not Hitting with Blinking Light Issues (2024)


Troubleshooting and Resolving Smok Novo 3 Not Hitting with Blinking Light Issues? ›

When you see that your Smok Novo not lighting and flashing or blinking blue light, it means that it requires cleaning. At the onset, take out the pod and use a paper towel or brush to clean the connectors on the inside. Likewise, also clean the bottom/base of the pod device to remove dirt/debris.

Why is my Smok flashing and not working? ›

Key Takeaways. If your disposable vape was working and is now flashing, the battery is most likely dead. If your brand new disposable vape is flashing and not producing vapour, it's probably faulty—also known as “Dead on Arrival” or DOA.

Why does my Novo 3 keep blinking when I hit it? ›

On many types of vapes, repeated blinking signifies a low battery. Keep your vape in great condition by charging it with the proper charger and cleaning the individual parts weekly with rubbing alcohol (minus the battery).

Why is my Novo lighting up but not hitting? ›

More often than not, the cause for your Smok Novo 2 not hitting is the fact that the battery isn't charged enough. Plug in your batter to its charging cable and let it charge completely before trying to hit the device again.

Why does my vape keep blinking and not hitting? ›

If your disposable vape pen blinks, there's an electronic issue that prevents it from functioning. The only electronic function it will perform is the blinking light. Luckily, it's most often just a battery that needs recharging. Although disposable vape pens are consumable products, they're also electronic devices.

How do you fix a SMOK that won't hit? ›

Remove and reinsert the pod. If that doesn't work, clean the contacts on the bottom of the pod and inside the SMOK Wave. You can use a cotton swab to remove dust and grime. If your SMOK Wave still isn't hitting, try using a different pod.

How to fix load short circuit smok? ›

Steps to Fix a Short Circuit
  1. Identify the Problem Area. Once you've identified signs of a short circuit, the first step is to pinpoint the problem area. ...
  2. Turn Off the Power. ...
  3. Inspect the Wiring. ...
  4. Repair or Replace Faulty Wiring. ...
  5. Check and Replace Damaged Appliances.

Why is my vape lighting up but not hitting? ›

It could indicate that the e-liquid is frozen inside the cartridge. Sometimes, it could be a sign of bad connection, faulty vape, or dead rechargeable battery.

Why did my Novo randomly stop working? ›

Issue: Device Not Firing

Steps to troubleshoot: Check the Charge: Ensure your device is fully charged. Inspect the Pod Contacts: Remove the pod and examine the contact points. Clean any e-liquid residue that might be obstructing the connection.

Can you update smok firmware? ›

Updating the firmware on your Smok Mag device couldn't be simpler. All the latest smok mag vapes come with USB capabilities meaning you can connect your device to your computer in no time at all and update your firmware while charging your device.

How to fix vape pod not hitting? ›

Start by making sure that your device is fully charged; if it still doesn't work after that then try cleaning out any residue from where the pod connects to the device before connecting a new one. For more serious problems like faulty connections, consider replacing both pod and battery for optimal performance.

Why will my Novo charge but not hit? ›

SMOK Nord & Novo Not Hitting

So your Nord or Novo is fulling charged and still not hitting, what do you do? First up you need to remove the pod and check the contact points. Sometimes the pod can leak a little bit onto the contacts which causes the pod to not get recognized.

How to repair a vape? ›

Screw the coil in very tightly and reassemble the tank. If your vape mod still isn't working, replace the atomizer coil. If replacing the coil doesn't resolve the issue, try using a different tank if you have one. If your mod still isn't working, it's possible that the mod itself has a problem.

How do you reset a SMOK? ›

The process might be a little different depending on your mod, but on the SMOK Alien, Mag, and Procolor, you can press and hold the Fire button until "Puff Clear" or "Puff Reset" is active. Select Yes.

What do I do if my SMOK blinks 4 times? ›

Still, if you do notice that your SMOK vape is blinking 4 times, you have checked to make sure that you are using the correct coil and have tried to use more than one in the tank and have also checked to make sure that there is nothing physically blocking the connection between the battery and the coil, then this could ...

Why does my SMOK vape blink three times? ›

Low battery

Once the vape is fully charged, the light will probably give you a different signal. For example, a red light blinking three times might mean the battery is empty while a permanent green light might mean it's fully charged.

Top Articles
Latest Posts
Article information

Author: Manual Maggio

Last Updated:

Views: 6483

Rating: 4.9 / 5 (69 voted)

Reviews: 84% of readers found this page helpful

Author information

Name: Manual Maggio

Birthday: 1998-01-20

Address: 359 Kelvin Stream, Lake Eldonview, MT 33517-1242

Phone: +577037762465

Job: Product Hospitality Supervisor

Hobby: Gardening, Web surfing, Video gaming, Amateur radio, Flag Football, Reading, Table tennis

Introduction: My name is Manual Maggio, I am a thankful, tender, adventurous, delightful, fantastic, proud, graceful person who loves writing and wants to share my knowledge and understanding with you.